here are the simple steps to attach the clips onto the rope. It's easier than you think!
STEP 1: Pinch the flagpole rope where you want to add the flag snap. TIP: We recommend placing the snaps on either side of the knot in your flagpole rope.
|STEP 2: Line up the tapered end of the vinyl cover and pull the rope through.
|STEP 3: Guide the pinched rope through the loop at the base of the snap.
|STEP 4: Slide the rope over the top of the snap.
|STEP 5: Pull the snap through to tighten the rope.
|STEP 6: Slide the vinyl cover forward until it covers the snap.
|STEP 7: Open the snap to attach to the flag's grommet.
Repeat steps 1-7 to add additional snaps and covers.